Plate damaged plate heat exchanger should be replaced in a timely manner

1, the damaged plate should be replaced in a timely manner. If there is no spare plate, in the case of operation can be removed under the two adjacent plate (two pieces of plate should not be the plate should be replaced with a four hole plate), clamping size should be reduced accordingly.

2, the aging of the gasket should be replaced. The plate and seal off phenomenon, the adhesive sealing groove with thinner wash plates, after cleaning, adhesive coated for sealing groove, re bonding.

The rear surface will produce different degrees of scale or sediment long-term operation 3, plate heat exchanger, reduces the heat transfer efficiency and increase flow resistance, so the equipment should be based on the actual situation of water quality, medium temperature characteristics of regular open inspection to remove dirt. Sodium carbonate solution can be used to clean the plate. Do not use metal brush to avoid scratching the surface and reduce the corrosion resistance. For a small amount of sediment deposition in the channel or the debris in the medium, it can also be used in the opposite direction of the operation of the short run, so as to get out of some of the sediment, but also a good effect.

4, in the winter to stop the operation of plate heat exchanger, the equipment should be put inside the media to prevent freezing equipment, but also the use of other antifreeze measures.

5, the plate heat exchanger plate and gasket should be kept clean, the board should be placed neatly, and in accordance with the product assembly diagram. When pressed, the screw should be under the angle of compression, the force should be uniform, to prevent the damage to the individual bolts and studs.

In order to make the plate heat exchanger of customers to maintain in the best state, ARD Reed with years of technical experience accumulated over the years, with "dismantling, cleaning" and "improve the operation" and "local service" rich customers in order to make the plate heat exchanger is maintained in the best state, Ai Rui de ARD with years of technical experience accumulated over the years. "Dismantling, cleaning" and "improve the operation" and "local service" and other rich service menu, carry out maintenance services.

Repair and maintenance services to "take back the factory inspection and repair" and "on-site cleaning and maintenance", "take back the factory inspection and renovation" will be the client's plate heat exchanger host recovery, in the best state of recovery back. "On-site cleaning and maintenance" is the company's professional engineers to carry professional equipment to the user site operations, short time, high efficiency, will not delay the production and operation of customers. In addition, we also provide consulting services to help customers maintain the best state of plate heat exchanger.

Customers can choose the type of service according to the conditions and conditions of use, so you can maintain the best operating state of the machine in a variety of ways.