Alfa Laval plate heat exchanger model meaning M10-MFM M10-BFG

The plate heat exchanger is composed of a group of metal corrugated plates, which are provided with an opening, and a liquid flow channel is formed by opening holes. The corrugated plate is arranged between a fixed fixing plate and a movable pressing plate, and is clamped by a clamping bolt. The board is provided with a gasket, which seals the passage between the boards and makes the liquid flow into the adjacent channel alternately. The number of plates is determined by the change of flow rate, physical properties of liquid, pressure drop and temperature. Plate corrugation causes liquid turbulence and supports the plate to withstand differential pressure. The corrugated plate and the pressing plate are fixed between the upper and the lower rods, and the two are fixed on the supporting frame. The interface is arranged on the fixing plate and the pressing plate if one or two liquid forms a plurality of channels in the device.

Model: M10

Typical capacity

Liquid flow rate: maximum 50 kg/s, depending on the medium,

Allowable pressure drop and temperature variation.

Water is heated by steam: 0.7 to 3 MW

Plate type: M10B, M10M and M10MD

Frame type: FM, FG and FD

Standard material

Fixing plate: low carbon steel coated with epoxy paint

Nozzle: carbon steel

Lining: stainless steel, rubber, titanium

Plate: stainless steel AISI 316/AISI 304, titanium,

Alloy 20/18/6

A seal:

M10B nitrile rubber, EPDM

M10M nitrile rubber, EPDM, HeatSeal F, HNBR, EPDMF, VitonG

technical data

Mechanical design pressure (g) / temperature:

FM 1 MPa / 160 C

FG 1.6 MPa / 180 C *)

FG ASME 150 psig / 350 F

FD 2.5 MPa / 160 C

FD ASME 300 psig / 320 F

*) FG framework can also be MPa/200 at 1.2 degrees C when used in the steam system, without a safety valve.

Maximum heat transfer surface:

M10B:90 M2 (970 sq. ft)

M10M:60 M2 (650 sq. ft)

Interface:

FM - Size 100 mm DIN PN10 or ANSI 150 2501

FG - Size 100 mm DIN PN16 or ANSI 150 2501

FD - Size 100 mm DIN PN25 or ANSI 150 2501

FD - Size 100 mm DIN PN25 or ANSI 300 () (ASME)

Main dimensions:

Unit of measurement (mm)

Model H W H

M10-FM 1.084470215

M10-FG 1.084470215

M10-FD 981470131

M10-FD ASME 1.084470215

The number of tightening bolts varies according to the pressure rating.