Safe use of titanium plate

 Titanium plate heat exchanger in the first for the moment, in order to avoid the pressure fluctuations caused by excessive heat exchanger leakage, should also slightly open the cold and hot medium inlet valve, exhaust gas heat exchanger for slow step-up until fully open inlet valve, then slowly and slightly open the cold and hot medium water valve. Blind switch in and out of the water valve or other causes of medium pressure fluctuations, are likely to cause the leakage of stainless steel plate heat exchanger.
                                        
         

Filter cleaning of plate heat exchanger

In order to reduce the number of inspection and maintenance of the plate heat exchanger, there is a coarse filter in the inlet pipe of the hot and cold medium, which can prevent 3 5mm particles from blocking the channel. When the filter before and after the pressure difference is large, you can open the filter cleaning. Too frequent cleaning of the filter will also cause the stainless steel plate heat exchanger due to the blockage of the plate channel blockage.